Products

Access Management Tools
Desktop Reader
Encoder
Portable Programmer Device
AElement RFID Lock [WiDNA]
AElement ANSI Version
AElement ANSI Mortise Lock
AElement DIN 18250 Mortise Lock
AElement EURO Version
Battery Holder Finishes
Handles
Reader Finishes
Carriers
Contactless Cards
Contactless Key Fobs
i-Buttons
i-Buttons Bracelets
Door Controllers
Model CU50EN
Model CU50ENSVN
Model CU2010
Model CU5000
Model CU5010
Model WRADAPT
Model CUADPT
Model EB5008
Electronic Cylinder
Australian Oval Profile Cylinder
European Profile Half Cylinder
European Cylinder w/ Thumbturn
Euro Prof. Cylinder Cog Wheel Cam
European Profile Double Cylinder
Cylinder For Swing Handle
GEO Grip A and GEO Grip H
Swiss Profile Half Cylinder
Swiss Profile Cylinder
Swiss Profile Double Cylinder
UK Half Cylinder
UK Oval Cylinder
UK Oval Double Cylinder
UK RIM Cylinder
US Mortise Cylinder
US RIM Cylinder
Padlock 48mm
Scandinavian Profile Cylinder
Scandinavian Profile Cylinder
Scandinavian Profile Cylinder
Scandinavian Security Cylinder
Wall Readers
Model WR2000FS / WR1000FS
Model WRM2000 / WRM1000
Model WRM9001E
Model WRM2000EK
Model WRM9001
Model WRM 9001 & WRMFWAV
Models WRM9001 and WRMKP
Model WRM9001E
Model WRM9001EK
Model WR9001FS
Models WRMBH1-2, WRMBL1-2
Model WRMPE9SK
Wireless Realtime Access Control
Escutcheon
Gateway
Node
Mortise Locks
Model LA1M15 & LA1M05
Model LC2M
Model LE7E
Model LE8P
Model LE9E
Model LSN25, LSN05 & LSN04
XS4 Panic Bar Solutions
XS4 SALTO Panic Bar Antipanic
XS4 SALTO Panic Bar Kits
XS4 SALTO Panic Bar PBE9000
Model-CUADPT-&-WRADAPT-2

Model WRADAPT

With the SALTO Wall Reader Adaptor, it’s possible to inte- grate with third party devices such as time and attendance, POS etc. The Wall Reader Adaptor is designed to read data from the RW carriers and send this to an external device. It is connected on one side to any SALTO Wall Reader, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND.

Main Features

  • Configuration by dip switches to control data to be read and the interface with the external device.
  • Voltage required: From 7 to 15V from the external device. Can also be optionally powered through the jack connector.
  • Connection to the reader: UTP CAT5 cable.
  • Connection to the external device: 4 pin block terminal.
  • Data read by the WRADAPT: ROM CODE,TRACKS ON KEY, WIEGAND CODE.