Model CUADPT
With the SALTO Control Unit Adaptor, it’s possible to inte- grate with third party devices such as time and attendance systems. The Control Unit Adaptor is designed to allow users to up- date their cards at the reading point they use on a daily basis, for instance a Time and Attendance terminal. The SALTO wall reader and door controller will update and revalidate the card (see CU50ENSVN for all features) and then send the relevant ID data to the 3rd party device such as a T&A controller.
This means you can now access a door with all the conve- nience of SALTO and control your staff attendance at the same time. The CU Adaptor is connected on one side to any SALTO door controller, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND.
Main Features
- Configuration by dip switches to control data to be read and the interface with the external device.
- Current required: 12V from control unit.
- Connection to the CU: UTP CAT5 cable.
- Connection to the external device: 4 pin block terminal.
- Data read by the CUADAPT: ROM CODE, TRACKS ON KEY, WIEGAND CODE.
