
Model CU50EN
The SALTO CU50EN is an online IP door controller that can have 1 or 2 wall readers connected and has 2 control relay outputs. Access control changes can be carried out on the SALTO software and are then actioned at the door controller in real-time. It provides full online features via the networked Ethernet / WIFI link such as door monitoring status, remotely controlling door opening and Roll Call.
Main Features
- Online IP door controller (ethernet 10 BASE-T).
- Two wall reader connections, read in – read out locking, and has Anti pass back mode available by connecting 2 wall readers.
- Two relay output.
- Upgradable to CU50ENSVN.
- Compatible with SALTO relay extension board (EB5008) controlling up to 128 relay outputs suitable for elevators etc.
- To be used with all SALTO wall readers (excepted WRM1000).
- Can be used with the SALTO WRMKP for dual identification (Carrier+PIN).
- Request to exit (RTE) switch input.
- Door monitoring and tamper monitoring via contacts input.
- Door state input.
- Relay outputs can be controlled with time tables.
Online Features
- Real-time access control changes:
- Live monitoring of user entry and exit through the door controller.
- Live audit trail build up on the software.
- Door monitoring status for forced door and door left open alarm.
- Remote door opening from software.
- Door lock out, or lock open emergency setting from software.
- The IP door controller can be included in roll call set up used, for example for user
- location monitoring, parking control etc.
- Works as online hub up to 40 online Energy Saving Devices.
- Connected to standard Ethernet/WIFI network.
- Works offline if the network connection is lost.
- All the communications between the IP door controller and the PC are secured and encrypted. In addition the CU is protected by a 3DES encrypted challenge / response for a higher security level.
- Invalidates deleted cards.
Certificates
- CE EN55022 (1994), Class B.
- CE EN 61000-4-2 (1995).
- CE EN 61000-6-1 (2001).
- CE EN 61000-4-3 (1995).
- CE EN 61000-6-2 (2001).
- CE EN 55024 (1998).